Introduction of peristaltic pump filling machine The pump source of peristaltic pump filling machine adIPL-OPT-machine.html target='_blank'>OPTs peristaltic pump, which makes full use of the characteristics of peristaltic pump. Its structure is simple, and there is no place for the pump body to contact with liquid medicine, so there is no need to clean and disinfect the pump body. The pump is driven by stepper motor or servo motor. PLC control makes it easy to adjust the loading capacity. It can be adjusted at any time under the working state by inputting the corresponding numbers. The accuracy can reach ± 1%. The modular structure is adopted. Each unit has 4 channels, which can be extended to 4 units (16 channels), sharing one controller. Filling principle The peristaltic pump filling machine uses 8 equal parts of the bottle rotating drum, so that the bottle can be automatically lifted and positioned during the operation, the needle is inserted, and the 8 needles are rotated at a constant speed to track the filling. An ingenious filling distribution system is used to make the two needles of each pump fill alternately. Thus, the filling time is long, the intermittent movement is stable, and the output can be fully improved, especially for the large dosage of more than 15ml More outstanding, according to the bottle and the filling capacity below 20ml, the maximum can reach 240 ~ 300 bottles / min (frequency control). The machine has the advantages of simple and novel structure, convenient maintenance and adjustment, stable operation, low noise and high degree of automation. It has a bottle reversing stop control, no bottle stop filling control, alarm for lack of plug or cover, and automatic speed reduction. When the plug or cover is supplied, it will automatically speed up to the set range.
